• LED Ring type Switch -White_Momentary


These Stainless steel metal buttons are rugged , waterproof and look real good . Simply drill a 19 mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep any water out of the enclosure. On the front of the button is a flat metal actuator, surrounded by a White plastic LED ring. On the back there are 3 contacts for the button (common, normally-open and normally-closed) and 2 for the White LED ring (+ and -). Connect 3 to 6V to the LED to have it light up nicely, there's a built in resistor! If you want to use this with a higher voltage, say 12V or 24V, simply add a 470 ohm resistor in series with the LED connection to keep the LED current at around 20mA.
This button is a momentary push button, when you press it the 'normally-open' contact shorts to the common contact. When you release it, the contacts open up again.
The switch and LED are separated, so you could wire it to turn on when pressed or vice versa or whatever you wish! Check the tech details for information!

Technical Details:

Protection Level: IP67
Max. Current: 5a
Max. Voltage: 250v
Material: stainless steel     
Shape:     flat round     
Diameter: 19mm
Voltage: 5a 250v
Function: on-off (momentary type)
Type:Anti-vandal type push button switch

Write a review

Please login or register to review

LED Ring type Switch -White_Momentary

  • Product Code: DA-LRS-M-W
  • Availability: In Stock
  • 472.00INR


Related Products

Soft Start Module with Thermal protection - Dual Sensors

Soft Start Module with Thermal protection - Dual Sensors

Soft start with thermal protection Description: The linear power supplies normally used in Aud..

2,242.00INR

Soft Start Module with Thermal protection - Quad Sensors

Soft Start Module with Thermal protection - Quad Sensors

Soft start with thermal protection Description: The linear power supplies normally used in Aud..

2,478.00INR