4 Way Stereo Audio Input Selector System - Chassis mount RCA Block

Highlights:

• 4 Way Stereo Audio Input Selector System with Direct Chassis mount RCA Block
• Features High Quality Parts And Compact Design
• 24K Gold Plated 4X4 RCA Blocks 
• The Audio Signal Is routed Untouched from the Input to the Amplifier Board,No electronic parts are used in the Audio Signal Path.
• Silver Contact Relays.

Description:
This is a high quality Audio Input selction system that routes any one out of the 4 Inputs connected, to the Amplifier's input. The switching is done with the help of high quality silver contact Relays. No electronic component interferes with the audio path, thus the audio signal remains 100% pure and untouched. This module is built using the highest quality parts for the price. The circuit can be Driven by AC 12v and it features an on board power rectifier 

Mounting:
The board can be directly mounted on to the back panels of the Amplifier / Preamplifer Chassis.
The Two Rca blocks have to be mounted from the inside of the chassis and the tightened with the Screws( provided Along) From the outside of the back panel.

For Hole Size and Locations on the Back Panel , please check the image Below

Selection switch
The input selection switch is of a rotary kind, that is mounted on the front panel of the amplifier / preamplifier.The rotary switch pcb is connected to the selection board by a jumper cable ( provided).
This Pcb also has a circuit to connect 4 LED's that represent the type of input selected. These LED's are not soldered to the PCB but are provided along so that user may mount them as per the requirement.

Technical parameters:
Operating voltage: AC 12V 
PCB size: 98 * 42mm 
Selector switch PCB board size: 60 * 42mm
PCB Type : FR4 grade glass-reinforced epoxy board with electroless nickel plating and high grade black soldermasking. 
PCB copper foil is 2 oz 

Whats included:

1 x Main Selection board ( Pre-assembled)

1 x Seclector switch with 4 LED's

1 x Patch cable