Goot BS-10

Product Description: 

A surface to be joined that is oily or oxidized will prevent solder from spreading during soldering. This soldering paste removes such oil or oxides and improves wettability. Assists soldering of electrical wiring and electrical components in hobby kits. This product can be used to get excellent and easy Soldering results for the following  

Banana Binding posts , RCA Sockets , Easy Connects , All Kinds Of Wire Terminals , Can be very useful while assembling DIY amplifiers and Preamps

How to use: 

Using the end of a match or toothpick, apply a little soldering paste to the leads that will be soldered .Place the soldering iron tip over the leads.Contact the solder against these leads. Heat the solder till it flows freely, then quickly move the soldering iron and solder away.

How to clean:
Using the cotton swab apply a little IPA (isopropyl alcohol) on the stain and wipe it off using tissue paper or a piece of cotton. Remove it completely to avoid surface corrosion.

CAUTION:
This soldering paste is acidic. Flux residue should be removed to avoid surface corrosion. Not water-soluble.

BS-10 is not suitable for use on PCBs. Applying BS-10 to printed circuit boards could result in electric leakage leading to fire as BS -10 contains electrolyte(a conductive substance).

Do not dip the soldering iron tip directly into the soldering paste. 
Composition and content:

Vaseline - 80- 90%
Zinc chloride - 4- 6%
Ammonium choride - 1- 3%
Paraffin - 6- 9%
Water - 2-4%
Package Content: 

1 pc Soldering Paste Goot Bs-10 - net 10g 

Beware Of Fake Goot Products . Buy 100 % Genuine BS-10 From theaudiocrafts