Goot Cp-2015 Desoldering Braid

• Braided cooper wire desoldering wick saturated with wash-free rma flux 
• Exquisite and practical professional tool
• Highly resistant to oxidation and corrosion
• No foul smell
• Pure OF copper Used
• Halide free, organic no-clean flux
• Assists in Fast desoldering which enables less heat transfer to the PC boards and components

How to use :

Place the desoldering wich over the solder to be removed, then push the heated soldering iron tip on to the desoldering wich.The solder will be absorbed remove the desoldering wich after the solder has been absorbed cut off the used section of the wich using nippers repeat steps 1,2 and 3 if the solder is not removed completely.Absorbability may differ depending on the type of solder.Sn63% and 63% (tin content) have good absorbability.Do not force the tip against the desoldering wick to avoid injury to yourself and/or demage to the parts and PCBDo not heat the desoldering wick for more the 5 sec to avoid damage to the parts and PCB

GOOT CP-2015 Desoldering Wick :
Width    2.0 mm
Length    1.5 m