Description:

18AWG Steel Laminate OFC Inductors

All The Inductors in this section are manufactured with the best quality standards for the price . In case of Audio inductors the audio signal has to travel through extremely long lengths of copper wire, so the quality of copper should be very good.  By Quality we mean that the copper should be Oxygen Free and have the highest Conductivity. All Of our Coils Use the High quality 99.99% OF- copper made using the CDA101 copper cathode,  Our coils are wound on a CNC Orthocylic Precision Winder. The layering of the coils is very important and while a coil is being wound on a CNC precision winder . Proper wire tension is constantly measured by the feedback system in the machine which makes sure that the wire is not stretched too hard and inturn the structure of the copper is not harmed in any way .The Copper layers are wound very perfectly and then are baked that ensures no saturation, hysteresis, or other magnetic distortions. These coils have finally been measured using a Hi-End  LCR bridge and the DCR values are tabled Below . The Inductance values are within a very tight tolerance and as per us there is no need of matching pairs. 

Specifications: 

• Highly Optimized Former Design and Core Size ensures Lowest Possible DCR .
• Wire type and gauge: Uses High quality QA-1 18 AWG OFC Polyurethane enamelled wire.
• All the Inductors have been Measured @ 1Khz / 1.0v
• Precision CNC wound with Tension Feedback/ Control
• Core type: Steel Laminate Solid Core
• DC resistance: Please Refer to the table Below
• Tolerance ±2% 
• Power handling: 250 watts RMS

• All Inductors Have Been Measured @ 1Khz /1.0 V .
• The Above Data has been Measured Using 4 wire Kelvin Resistance Measurement. 
• The DCR values have been rounded off to 0.XX ohm value